Implant Crown Cost Calculator
New implant crown or replacing an old one — country, material, retention type and abutment choice, itemized line by line.
How much does an implant crown really cost in 2026?
"Implant crown cost" means different things depending on your situation: are you placing a brand-new implant and need the whole system, or is the implant already integrated in your jaw and you just need the crown itself — new or as a replacement? This calculator handles both, and prices the crown material, retention method and abutment type separately, since each genuinely changes the bill.
Crown material cost comparison (United States, crown only)
| Material | Price range | Best for |
|---|---|---|
| PFM (porcelain-fused-metal) | $800 – $1,200 | Budget-friendly, posterior teeth |
| Full Zirconia (monolithic) | $900 – $1,300 | Strength, posterior teeth |
| Layered Zirconia | $1,000 – $1,500 | Balance of strength & esthetics |
| Gold Alloy | $1,000 – $1,600 | Durability, rarely visible back teeth |
| E-max (lithium disilicate) | $1,100 – $1,700 | Esthetics, front teeth |
These figures are for the crown and abutment only, assuming the implant post is already placed and integrated. Other countries scale roughly in line with the general implant cost differences shown across this site — the calculator above applies country-specific figures automatically.
Screw-retained vs. cement-retained crowns
A screw-retained crown attaches through a small access hole with a screw, meaning it can be removed later for repairs, cleaning around the implant, or replacement without damaging the crown — usually the preferred choice for premolars and molars where the access hole location doesn't affect appearance. A cement-retained crown is bonded in place like a natural tooth, giving a slightly more seamless look with no visible access hole, which is often preferred for front teeth, but it's more difficult to remove non-destructively if something needs attention later.
Stock vs. custom abutments
A stock abutment is a prefabricated connector that fits directly onto standard implant platforms and works well for straightforward, well-aligned cases. A custom abutment is milled specifically for your case and is typically recommended when the implant is angled, when there's limited space between neighboring teeth, or when the surgeon wants precise control over how the crown emerges from the gum line for the best esthetic result — particularly common for front teeth.
Frequently asked questions
How much does an implant crown cost?
An implant crown alone (not including the implant post) typically costs $800-$1,700 in the US depending on material, with porcelain-fused-to-metal on the lower end and e-max or layered zirconia on the higher end.
What's the difference between screw-retained and cement-retained implant crowns?
A screw-retained crown is held in place with a screw through an access hole, making it removable for maintenance without damaging the crown. A cement-retained crown is bonded in place, which can look slightly more seamless but is harder to remove for repairs.
Do I need a custom abutment for my implant crown?
A custom abutment is typically recommended for angled implants, tight spacing, or precise esthetic control. A stock abutment works fine for straightforward cases and costs less.
How long does an implant crown last?
A well-made implant crown typically lasts 15 to 25 years with good oral hygiene, though the material matters — zirconia and e-max generally resist chipping and wear better than PFM over the long term.
